140° PC Optics
Controlled Wide Distribution
A production-ready optical option for greenhouse toplighting layouts that need a wide but more controlled light spread.
- Production-ready PC lens
- Controlled beam spread
- Project-based selection
Greenhouse Optical Engineering
Production-ready 140° and 150° PC optics for commercial greenhouse toplighting, with custom optical development for project-specific lighting layouts.
Discuss Your Optical ProjectOptical Distribution
A wider beam can increase overlap between fixtures, but the correct beam angle still depends on the lighting layout.
Project Verification
With the greenhouse layout, fixture model, quantity, mounting height and spacing unchanged, changing the optic alters how light is distributed across the crop area.
The same greenhouse layout, fixture model, fixture PPF, quantity, mounting height, fixture spacing and target PPFD are used for both simulations.
Greenhouse Size
XX
Target PPFD
XX μmol/m²/s
Fixture Model
XX
Fixture PPF
XX μmol/s
Fixture Quantity
XX
Mounting Height
XX
Fixture Spacing
XX
Average PPFD
XX μmol/m²/s
Uniformity
XX
Minimum PPFD
XX μmol/m²/s
Maximum PPFD
XX μmol/m²/s
Average PPFD
XX μmol/m²/s
Uniformity
XX
Minimum PPFD
XX μmol/m²/s
Maximum PPFD
XX μmol/m²/s
The wider beam may increase fixture overlap, while the narrower beam may keep more light concentrated within the intended crop area. The final choice depends on the required PPFD, uniformity and greenhouse layout.
This is one project comparison under fixed conditions. It does not mean that 140° or 150° is universally better.
The optic is selected as part of the lighting layout, not by beam angle alone.
Greenhouse Toplighting Platform
The 140° and 150° PC optics are developed for HIGROWSIR commercial greenhouse toplighting platforms and can be selected around fixture spacing, mounting height and project lighting requirements.
Explore the TopSpread 3C Commercial Greenhouse LED Toplight to see the fixture platform connected to these optical options.
Greenhouse Optical Project
Send us your greenhouse drawing, mounting height, target PPFD and uniformity requirement. We can evaluate the 140° and 150° optics, or determine whether a custom distribution is needed.A greenhouse drawing and target light level are enough to start.